🔒 The Brainy Bunch – The One Who’s Locked Up -Clicker Multiparts・ STL File for 3D printing・Cults

Here’s the second one in the collection: the one who’s locked up.

Part of The Brainy Bunch—a crew of oddly smart, slightly chaotic little weirdos. The gang keeps growing… and there’s more on the way!

🛠️ Print & Assembly Tips

All parts have been fully tested and assembled—no surprises here!
However, file orientation might not be optimal, so feel free to rotate them however works best for your setup.

Recommended settings:

Small parts like eyes, pupils, and especially the brain print them at 0.12 mm layer height for crisp details.
Make sure horizontal expansion is set to 0.
Pegs and sockets are designed as guides, but I highly recommend using glue once you’ve test-fitted everything.
The clicker mechanism should be glued in place once confirmed working—it can loosen up over time.

Clean up any seam lines or stringing that could interfere with the fit—especially important for moving or fitting parts.
For the cigarette, just snip a piece of white filament and dab a bit of red/orange nail polish or paint to fake the fire.

BUT REMEMBER: SMOKING IS BAD FOR YOUR HEALTH 🔥🚭

📏 Model Specs

Height: ~10 cm
Number of parts: 18

Extras needed: A classic 2 cm pen spring for the clicker brain mechanism.

🎬 Assembly Video

To assemble it correctly, follow the step-by-step assembly video here:

https://youtube.com/shorts/E-x7b1F4Ccg

🧡 License & Support

This model is for personal use only.
If you want to support the project, get one exclusive model per month, or grab a commercial license for this or any of my other designs, check out my Patreon:

👉 https://patreon.com/Plop3D

Hope you like it! Feel free to reach out with any questions, comments, or print photos — I’d love to see how yours turns out!