BAMBU STUDIO SETTINGS – PLA, .4 nozzle, Cool Plate
SIZE AT 100%
Pumpkin: 8″ x 3.98″ x 5.81″ (inches)
Stem: 2.29″ x 1.22″ x 2.36″ (inches)
PRINT TIME
Pumpkin: ~9hr 41min
Stem: ~50min
LAYER HEIGHT
Layer Height: 0.2mm
Initial Layer Height: 0.2mm
LINE WIDTH
Line Width: 0.42mm
Initial Layer: 0.5mm
Outer Wall: 0.42mm
Inner Wall: 0.45mm
Top Surface: 0.42mm
Sparse Infill: 0.45mm
Internal Solid Infill: 0.42mm
Support: 0.42mm
SEAM
Seam Position: Aligned
WALL GENERATOR
Wall Generator: Arachne
Wall Transitioning Threshold Angle: 10
Wall Transitioning Filter Margin: 25%
Wall Transition Length: 100%
Wall Distribution Count: 1
Minimum Wall Width: 85%
Minimum Feature Size: 25%
STRENGTH >>>
WALLS
Wall Loops: 2
Detect Thin Wall: Disabled
SPARSE INFILL
Sparse Infill Density: 15%
Sparse Infill Pattern: Grid
Length of Sparse Infill Anchor: 400%mm
Maximum Length of Sparse Infill Anchor: 20
ADVANCED
Infill/Wall Overlap: 15%
Infill Direction: 45
Bridge Direction: 0
Minimum Sparse Infill Threshold: 15
Infill Combination: Disabled
Detect Narrow Internal Solid Infill: Enabled
Ensure Vertical Shell Thickness: Enabled
SPEED >>>
INITIAL LAYER SPEED
Initial Layer: 50mm/s
Initial Layer Infill: 105mm/s
OUTER LAYERS SPEED
Outer Wall: 200mm/s
Inner Wall: 300mm/s
Small Perimeters: 50%
Small Perimeter Threshold: 0
Sparse Infill: 270mm/s
Internal Solid Infill: 250mm/s
Top Surface: 200mm/s
Slow Down for Overhangs: Enabled
Overhang Speed: 0mm/s (10%, 25%)
50mm/s (25%, 50%)
30mm/s (50%, 75%)
10mm/s (75%, 100%)
Bridge: 50mm/s
Gap Infill: 250mm/s
Support: 150mm/s
Support Interface: 80mm/s
TRAVEL SPEED
Travel: 500mm/s
ACCELERATION
Normal Printing: 10000mm/s
Initial Layer: 500mm/s
Outer Wall: 5000mm/s
Inner Wall: 0mm/s
Top Surface: 2000mm/s
Sparse Infill: 100%
SUPPORT >>>
SUPPORT
Enable Support: Enabled
Type: Tree (auto)
Style: Default
Threshold Angle: 30
On Build Plate Only: Enabled
Support Critical Regions Only: Enabled (If you do enable this, you will need to add supports to all teeth manually)
Remove Small Overhangs: Enabled
ADVANCED
Tree Support Branch Distance: 5mm
Tree Support Branch Diameter: 2mm
Tree Support Branch Angle: 45
Support Wall Loops: 0
Tree Support Brim Width: 0mm
Top Z Distance: 0.2mm
Bottom Z Distance: 0.2mm
Base Pattern: Default
Base Pattern Spacing: 2.5mm
Pattern Angle: 0
Top Interface Layers: 2 layers
Bottom Interface Layers: 2 layers
Interface Pattern: Default
Top Interface Spacing: 0.5mm
Normal Support Expansion: 0
Support/Object XY Distance: 0.35mm
Support/Object First Layer Gap: 0.2mm
Max Bridge Length: 10mm
Independent Support Layer Height: Enabled
OTHERS >>>
BED ADHESION
Skirt Loops: 0
Skirt Height: 1 layer
Brim Type: Auto
Brim Width: 5mm
Brim-Object Gap: 0.1mm
