🏠 BRINKAMAHOF LIGHTHOUSE – N (1/160) SCALE MODEL LANDMARK・ 3D File for 3D printing・Cults

Built in the late 19th century, the Brinkamahof lighthouse was located at the estuary of the Weser River, on the northern coast of Germany playing a key role in guiding ships towards Bremerhaven.

The model was designed using pictures and detailed drawing of the actual building in scale 1/160 (N scale).

You can resize it using your favourite software before print, however, if you do so, some of the parts may lose stability or look over scaled.

Model has 12 different pieces that you need to assembly as any other model kit: I attached an instruction booklet together with the downloaded files.

To complete the model you will need construction paper 0.25mm thick to build the upper catwalk: With the download you’ll get printable template and SVG file too to use it if you have acces to a laser cutter.

You’ll have a lot of fun with printing, painting, and weathering.

This model can be a great addition to your layout or diorama.

Happy modelling!

• Designed in N (1:160) scale to be printed using SLA
• Pieces will work well using filament printers too.
• Dimensions are Ø27 x H168.3 mm
• The widest part measure Ø27 mm: Check your 3dprinter build volume
• The kit has 12 parts: With the download you get both with and without supports.
• The supported files are not with the optimal printing orientation but with the optimal orientation according to minimize sanding and provide a perfect fit between parts. However, you can add supports according to your methods.
• The kit part T1 LAMP correspond to the lamp and has to be printed in clear resin.
• The kit has been designed to allow space for wiring in case you want to lighten with micro LEDs

My printing parameters:
-ANYCUBIC PHOTON MONO X
-Resin ELEGOO standard grey
-Layer height 0.040
-Exposure 1.7 s
-Bottom layer count 6 /25s
or
-ANYCUBIC PHOTON M5s
-Anycubic High Speed Resin
-Default parameters for High Speed resin

Happy modelling!