Free STL file Gorkabot 🎲 ・3D printable model to download・Cults

The Gorkabot is a massive armored mech, built as an effigy of a greenskin god! Armed to da teef da Gorkabot krushes all kind of ememys with it’s klaw while shredding infantry with hails of bullets from the DAKKA-Storm gun.

In the Gorkabots belly is space for a few greenskins to pop out, if the time is good for some krumpin’!

FOR BEST QUALITY PRINT, PLEASE READ ALL(!) OF BELOW:

To print the Gorkabot, you need time or a resin printer 😉

I REALLY recommend a layer high of 0.075 or lower for all parts to get the quality I intended.

Please see the pics, those are all printed in FDM (<=0,075mm)!

I tried to keep the need of tree supports low, but I highly recommend it to use them – make sure to set the tree support z-distance to a multiple of 2 (layer hight) for optimal removal (keep in mind: layer hight 0.05 to 0.075(!) )

——– EXCEPTIONAL ‘fings for this model: ———-

———- COMPATIBILITY ———-

Arms and legs should be compatible to my Mega Bots (not testet)

———- MAIN BODY ———-

“GorkaBot_Belly.stl” prints without tree support! Just use regular supports.

“GorkaBot_Torso.stl” prints without tree support! Just use regular supports. flip the model slightly to the back (see Cura screenshot)

The doors should be printed without supports with a brim (see Cura screenshot)

———- LEGS ———-

The legs are unique, there is an individual model for the right / left leg. Those are mirrorable / interchangeable if you want.

———- ARMS———-

The arms should fit 10x4mm magnets (not tested) but also have a ball joint for more posability…

The “GorkaBot_Klaw_Arm_02.stl” should be printed 45° “floating 1,5mm in the air” see my Cura screenshot – this will give you the best quality result!

———- Over all printing recommendation! ———-

Many parts have a “flat surface” -> face those to the build plate.

Detaild sides / most visible sides should be faced towards the cooling fan.

———- Assembly ———-

if you need instructions – just open all files in 3D Builder or e.g. Meshmixer. There you can look where they go

———- FOLLOWING: ———-

Shame less beggin’ for some coins for coffein I need doin’ stuff like that 😀 😉

Please consider a tip ….this highly detailed model was a work of 100h+ of free time!

If you do so, I HIGHLY APPRECIATE YOUR GENEROSITY 🙂 🙂 🙂

Kind regards,

Tersus