3D file Chipmunk the flexi toy in cartoon style 🐿️ ・3D print design to download・Cults

Here is our new Flexi design – Chipmunk.

We’ve made it in a cartoon style, just like our little fox cub.

The Chipmunk is available in two versions – with a solid head and with a movable head.

There are 2 versions of the head – Standard and Happy (with an open mouth).

There are STL and pre-painted 3MF files in the ZIP file.

The toy is for private use only. The files aren’t allowed to be resold, shared or given away.
If you want to sell physical prints of our designs, you can do so by subscribing to Commercial tier on Patreon

That’d be amazing to see your results on Cults in the Make section or on social pages tag us using #happyflexipets

By the way, here is our Instagram

Happy printing 💜

Our printing recommendations for the model.

Before printing the colored model with the moveable head version, print a test for the pin in one color of the filament that will be the main one (the pin and socket in the neck will be printed from this filament). In the file Pin_test.3mf, we have prepared the neck socket, head, and 4 pins with different sizes ranging from 100% to 103%. The pin should fit well into the socket, and the petals should remain intact.
If even the largest pin from the test moves freely in the socket, print pins in an even larger size.

It is better to avoid using silk filaments – they are quite fragile, and the petals often break when inserting the pin.

Insert the pin with the flat side facing the back.

You can see our settings below

Material: Bambu Lab Matte PLA Charcoal, Ivory White;
Bambu Lab Basic PLA Beige, Brown
Printer: Bambu P1S
Nozzle: 0.4
Layer height: 0.2 mm
Infill: 5%
Walls: 2
Scale: 100%
Slicer: Bambu Studio

The improved head attachment system doesn’t require any supports for the pin. Just set brim for better adhesion.

If you have any questions you can reach us out on Instagram, Facebook, VKontakte.

Check out the Little Fox Cub we spoke about it above